Are you familiar with Snapmaker 10w laser? Don’t worry if you haven’t heard of it before or if you have but aren’t sure what it is because this post has all the information you require. Let’s go through some of the Snapmaker laser’s incredible features.
The Snapmaker 10W Laser Module’s distinctive wind channel creates high wind pressure, which effectively disperses fumes as the laser beam penetrates the material.
After that, the vapors are directed into the grids of the Laser Engraving and Cutting Platform, where they are diverted out to lessen their impact on laser machining.
No more hand-measuring the supplies. After you place your material on the platform, the module will calculate it for you. By employing the triangulation approach to gather many sets of data from the camera and light emitter, the module can measure the thickness of your material.
The lifespan of the laser diode will be shortened by extended exposure to high temperatures. The Snapmaker 10W Laser Module has two separate blowing systems for both its PCBA and laser to make sure the laser diode is adequately cooled whenever it is used. When used properly, the lifespan can go up to 8,000–10,000 hours.
Both user success and user experience are important to us. Because of this, we began a careful material testing procedure and assembled a case library for you in Luban. You have access to a whole collection of advised settings for well-liked laser materials, so you may choose one and start using it right away. In order to safeguard the user and any bystanders, we included a gyro sensor in the module to make sure that no laser beam will beep out if it is positioned incorrectly or moves from its intended location. It will then change its Z orientation so that the focal point precisely lands on the substance’s surface. You can finish your concentration in a short while.
The module quickly turns off if the temperature sensor detects a higher-than-normal working temperature (one that is greater than 55°C/131°F). After the temperature recovers to the normal range, you can resume using the Touchscreen.
Continued expandability. All Snapmaker 2.0 series models, with the exception of the 150 models, are compatible with the 10W Laser Module, and new machines will also be. It is also compatible with add-ons, including the CAN Hub, Air Purifier, Rotary Module, and Emergency Stop Button.
The wide-angle HD camera captures your material in a single shot, allowing you to see a real-time preview of your laser job on the material in Luban. Now it is easy and convenient to thoroughly inspect the work area.
The 10W Laser Module uses the most cutting-edge laser beam splitters to increase power from 5 W to 10 W. As a result, you have access to a wider range of materials, and the Snapmaker 10W Laser Module’s work rate may approach 6000 mm/min while slicing through basswoods as thick as 8 mm. When compared, the 1.6W Laser Module’s cutting speed is exceeded by up to 8 times. It can finish laser work in just a few seconds.
Using the Fast-axis Collimating (FAC) lenses included in the two laser diodes, the module initially compresses the laser spot of each laser diode. The two laser diodes’ laser beams are then combined using beam combining technology, creating a higher output power and an ultra-fine laser focus (0.05 mm 0.2 mm), which allows for a higher energy density. With a narrower laser focus and more power, high-quality laser works with flawless details are produced.
Get this powerful machine in our online store today. Visit eu.snapmaker.com for more information.
